VOLT FREE COUPLER
DRY CONTACT OUTPUTS
Simple, potential free outputs for wide compatibility with many control systems
HAPTIC FEEDBACK
Haptic engine optionally provides feedback to verify all button presses
HALO LIGHT
Halo light can be configured to be permanently on, permanently off and optionally respond to switch presses. The standby halo light brightness can be adjusted with a press and hold of the button on the coupler.
FAST WIRING
Pre-made fly leads drastically reduce wiring time
BACKBOX
60mm centre compatible with UK & EU back boxes with no adapter plates required.
5-35V DC POWER
Can be powered by 5V, 12V, 24V, 35V and anything in between
Dry contact outputs for maximum compatibility
MAXIMUM SYSTEM COMPATIBILITY
Easy integration with all major control systems such as:
INTRODUCING THE TAP VOLT FREE RANGE
RAPID CONNECTIVITY
UNIVERSAL FLY LEAD
The FLY-UNIV1 connects into the back of the Faradite TAP Coupler Volt Free and provides loose fly leads. The fly leads can be connected to any suitable input module.
UNIVERSAL PUSH FIT
For systems that require a female terminal the FLY-UNIV2 allows the connections of fly leads from any 3rd party device. Supports keypads with 1 - 6 buttons.
LOXONE NANO DI TREE
Connecting the TAP Volt Free Coupler to a Loxone Tree bus is simple using the Nano DI Tree. Power the Coupler by connecting the loose orange and white fly leads to the orange and white terminal block.
LOXONE STAR
For Loxone systems that have been star wired the FLY-LOXO2 allows direct connection to a CAT cable. It includes a 1-wire temperature sensor.
CRESTRON C2N-UN181O
The Crestron C2N-UNI8IO allows for up to 8 inputs to be connected. The supplied Faradite fly lead uses inputs 1 - 6 with inputs 7 and 8 spare for external sensors such as the Motion Sensor 360 - Volt Free. Note: The C2N-UNI8IO does not support very fast double taps, only use single tap functions.
LUTRON QSE-CI-WCI
The Lutron QSE-CI-WCI allows for up to 8 inputs. Use the Faradite FLY-LUTR1 to connect the TAP Coupler Volt Free to the Lutron QSE-CI-WCI. Inputs 7 and 8 can be used for additional sensors such as the Motion Sensor 360 - Volt Free.
TECHNICAL SPECIFICATION
DRY CONTACT OUTPUTS
Volt Free / dry contact / potential free outputs make the TAP Volt Free range universally compatible and suitable for most major control systems.
HALO LIGHT
Halo light can be configured to be permanently on, permanently off and optionally respond to switch presses. The standby halo light brightness can be adjusted with a press and hold of the button on the coupler.
BACKBOX
60mm centre compatible with UK & EU back boxes with no adapter plates required.
5-35V DC POWER
Much like our popular range of motion sensors, our TAP Volt Free range can be powered from 5V, 12V, 24V, 35V and anything in between.
PRODUCT ARCHITECTURE
FRONT PLATES
TAP1-MWH
TAP1-BCO
TAP1-BNI
TAP1-BSS
TAP5-MWH
TAP5-BCO
TAP5-BNI
TAP5-BSS
COUPLER
COU-VOLF
FLY LEAD
FLY-UNIV2
FLY-UNIV1
FLY-LUTR1
FLY-CRES1
FLY-LOXO1
FLY-LOXO2